Denon AVR-2803/983 Setting the power amplifier assignment, Zone2 Control _Power Amp Assignment

The System Setup Menu reappears.

Enter the setting.

[1] Setting the power amplifier assignment

Make this setting to switch the power amplifier for the surround back channel to ZONE2.

If ZONE2 is selected, the signal that selected at ZONE2 is output at "SURR. BACK/ZONE2 PREOUT"

1	At the System Setup Menu	select "Zone2 Control"
	and press the ENTER button.

2	The "Zone2 Control" screen appears.
	Select "Power Amp Assignment"	and press the

ENTER button.

terminals.

System Setup Menu

Speaker Configuration

Delay Time

Channel Level

Digital In Assignment

Video In Assignment

Dolby Digital Setup

_Zone2 Control

Zone2 Control

_Power Amp Assignment

Zone2 Vol, Level

Exit

Select "Surround	Beck" to use as the surround back	Assignment	Power Amp Assignment
channel, "Zone2"	Power Amp
	to use as Zone 2 out.
	<13fi_f_	: Zone2	4Surr0undBack: k'Jli_'J_l_

	When "Surround Back" is selected	When "Zone2" is selected
	At the "Zone2 Control" screen, select "Exit" and press the ENTER button.
(_	The System Setup Menu reappears.
	Enter the setting.

[2]Setting the Zone2 vol. level

Set the Zone 2 pre-out output level adjustment.

At the System Setup Menu select "Zone2 Control" and press the ENTER button.

System Setup Menu

Speaker Configuration

Delay Time

Channel Level

Digital In Assignment

Video In Assignment

Dolby Digital Setup

_Zone2 Control

25