• Operating the surround mode and surround parameters from the main unit's panel.
1 Turn the SELECT knob to select the surround mode.
SELECT
oooo
I mD_
(Main unit)
1 2 1,3
•When turned clockwise
•When turned counterclockwise
F:::::o:oooov,
To select the surround mode while adjusting the surround parameters or tone control, press the surround mode button then operate the selector.
SURROUND
MODE
(Mainunit)
2 Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 60.)
SURROUND p._R.J_lE_E R
(Main unit)
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
•When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC ][, DTS NEO:6 modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.
57