Denon AVR-2803/983 manual Setup Menu, System, Speaker, Configuration, Delay, Time, Channel, Level

• This setting assigns the color difference (component} video input jacks of the AVR-2803/983 for the different input sources.

1	At the System Setup Menu select "Video In Assignment".		Setup Menu
	System
	Speaker		Configuration
	Delay	Time
	Channel		Level
	Digital		In Assignment
	zVideo	In	Assignment

2

4

Dolby Digital Setup

Zone2 Control

Switch to the Video In Assignment screen.

Video In Assignment

[_: NONE

[_: NONE

[_: VIDEO2

_: NONE

_: NONE

[_: NONE

Default [_4

Select the component (Y, PB/C8 and PR/CR)video input terminal to be assigned to the input source.

(_ input source selection _ _2_Component video terminal selection

Select "NONE" for sources for which the component (Y, PB/C8 and P£/C£) video input is not to be used.

-_ When the default, "Yes", is selected, the settings are reset to the factory defaults.

The System Setup Menu reappears.

ENTER the setting.

Sets the down-mixing method when not using a center speaker or surround speakers. OFF: The dynamic range is not compressed.

ON: The dynamic range is compressed automatically according to the combination of speakers being used.

1

2

At the System Setup Menu select "Dolby Digital Setup" and press the ENTER button.

Select "ON" if you want to use the Compression, "OFF" if you do not want to use it.

System Setup Menu

Speaker Configuration

Delay Time

Channel Level

Digital In Assignment

Video In Assignment

zDolby Digital Setup

Zone2 Control

Dolby Digital

Downmix Option Setup

When not	using a center		speaker	or surround		speakers, the	sound is	Compression
NOTE:				If the	sound	should seem	distorted
played from the front speakers.
because	the	input level	exceeds	the	allowable input for the front
speakers,	set	"Compression" to "ON".

24