Troubleshooting
Below is a list of messages mainly related to playback and recording problems, together with a brief explanation and a page reference where you can find more information:
Display | Cause | Remedy |
|
|
|
CHECK | The disc is damaged or | Take out the disc and check for dust, dirt, scratches, etc. Clean as necessary. |
DISC | dirty. |
|
| The disc is loaded upside | Take out the disc and reload it |
| down. | again after the disc is reloaded, unplug the power cord and plug it in again. If |
|
| the same message is still displayed, please contact a Pioneer authorized service |
|
| center. |
CHECK (blinking display)
A system error occurred, perhaps due to noise or static electricity.
Unplug the power cord and plug it in again. If the same message is displayed again, please contact a Pioneer authorized service center.
Display messages relating to playback
Display | Cause | Remedy |
|
|
|
NEW DISC | A blank disc is loaded. | Only recording is possible on blank |
|
| RW discs. Playback is not possible. |
|
|
|
NO DISC | An attempt is made to start playback without loading a | Open the tray and check that a disc is loaded. |
| disc. |
|
|
|
|
40
En