Pioneer PDR-W739 manual Recording Other Sources, Manual recording analog or digital, 4Press REC

Pressing INPUT

8 Recording Other Sources

COMPACT DISC RECORDER / MULTI-CD CHANGER

￿ ×óBÀö³²/

3-COMPACT DISC MULTI CHANGER

COMPACT DISC DIGITAL RECORDER

INPUT

OPEN/CLOSE

0

REC/

REC MUTE

¦￿

CD-R CONTROL à REC LEVEL

Á ¢￿DISP

6	7
	PUSH ON-OFF

Manual recording (analog or digital)

The main use for manual recording mode is when there are no specific start and/or end points in the source material — when you're recording from a tuner or a satellite decoder, for example.

1Make sure that any discs loaded in the CD changer are stopped.

2Load a CDÐR or CDÐRW disc.

If it’s a blank disc, the display shows NEW DISC.

If the disc isn’t blank, use the DISPLAY button to check that there's enough space on it for what you want to record.

3Press INPUT to choose the input to

use.

repeatedly switches the active input:

ANALOG – OPTICAL – COAXIAL

The recorder's display indicates the current input.

4Press REC.

The recorder indicates that it's in record-pause mode.

5For digital sources, check that the

signal is compatible.

Set the source playing (if it isn't already) and check the display. If you see the message Can't rec or Can't copy the digital signal is either a format that the recorder doesn't recognize, or the source is copy protected. Record through the analog line inputs if you see either message.

6Adjust the recording level, if necessary:

•To adjust the recording level when using a digital input, see step 4 of Digital synchro recording on page 32.

•To adjust the analog recording level when using the analog inputs, see step 4 of Analog synchro recording on page 33.

7Press 6 (CD-R side) to start recording.

8Start the source playing.

During recording, press Á¢(CD-R side) anywhere you want a new track to start.

9When you're finished, press 7 to stop

recording.

If you want to finalize the disc after recording, see page 20.

34