Pioneer PDR-W739 Copying CDs, Copying a programmed selection, tracks from in to the CD changer

5 Copying CDs

ë￿

DISC 1 DISC 2 DISC 3

$ Ý￿

1 2 3

4 5 6

7 8 9

10/0 >10

PROGRAM

COMPACT DISC RECORDER/

MULTI-CD CHANGER

REMOTE CONTROL UNIT

OPEN/CLOSE

1 0

2 0

3 0

COMPACT DISC RECORDER / MULTI-CD CHANGER

￿ ×óBÀö³²/

3-COMPACT DISC MULTI CHANGER

COPY START

CD=CD-R

	COMPACT DISC DIGITAL RECORDER
COPY MODE	AUTO SPACE

OPEN/CLOSE

0

Copying a programmed selection

You can automate the process of making a mix CD by using the programming function of the disc changer.

1Load the CD(s) you want to program

tracks from in to the CD changer.

You can use any of the three disc trays in the changer.

2Load a CD-R or CD-RW into the

CD-R tray.

If the disc isn't blank, make sure that there is enough space on the disc for what you want to record (see Switching the Display on page 30 for how to check this).

3Program a playlist of tracks you want

to record.

For detailed instructions on programming a playlist see

Programming a playlist (3-CD changer) on page 25.

4Press COPY MODE.

The display shows Program Copy.

If you want to switch the copying speed, do so here. The default is 2x speed. See Changing the copying speed on page 19 for how to change it.

If you want to adjust the digital recording level, do so here. The default is 0dB. See Setting the recording level on page 19 for how to adjust it.

5If you want to automatically space the tracks on the recording, press

AUTO SPACE.

Switching on automatic spacing makes sure that there's a few seconds of silence between each recorded track.

6Press COPY START CD=CD-R.

Recording stops automatically after the playlist has finished.

If the playlist is longer than the recording time available on the CD-R/CD-RW, recording stops when the end of the disc is reached.

• If you want to now finalize the disc, turn to page 20.

18