Pioneer PDR-W739 Finalizing and Erasing, 1Press ERASE 2Press 41 or Á¢ to change, the erase option

6 Finalizing and Erasing

COMPACT DISC RECORDER / MULTI-CD CHANGER

￿ ×óBÀö³²/

3-COMPACT DISC MULTI CHANGER

COMPACT DISC DIGITAL RECORDER

ERASE

CD-R CONTROL

4 1 Á ¢￿

67

When a finalized disc is loaded:

1Press ERASE.

2Press 41 or Á¢ to change

the erase option.

Switch between:

•Erase the TOC (‘de-finalize’ the disc so that further recording is possible)

DISC 1
DISC 2								CD-RW
DISC 3
ALL	FADER						ANA	FINALIZE
	L							ERASE
		8	40	18	6	0	OVER
X2	–dB
	R

• Erase all tracks

DISC 1
DISC 2							CD-RW
DISC 3
ALL	FADER						ANA
	L						ERASE
		8	40	18	6	0	OVER
X1	–dB
	R

• Press 7to cancel erase here.

3Press 6 (CD-R side).

The display shows the time remaining to completion.

•You can halt this erase process by holding down the 7 button for 10 seconds. Make sure, however, that you erase the disc completely at a later date since you can’t use a

partially erased disc.

Re-initializing a disc

1Press and hold ERASE for about four

seconds.

The display indicates all disc erase mode. After a short time, the unit goes into erase standby mode:

DISC 1					MIN		SEC
DISC 2								CD-RW
DISC 3
ALL	FADER						ANA	FINALIZE
	L							ERASE
		8	40	18	6	0	OVER
X2	–dB
	R

• Press 7to cancel all disc erase here.

2Press 6 (CD-R side).

The process takes about half the length of the disc. The display shows the time left to completion.

•You can halt this erase process by holding down the 7 button for 10 seconds. Make sure, however, that you erase the disc completely at a later date since you can’t use a

partially erased disc.

22