Pioneer PDV-20, PDV-LC20 Replacing the battery, Pull out the battery holder as shown below

Models: PDV-20 PDV-LC20

1 76
Download 76 pages 9.86 Kb
Page 62
Image 62

Replacing the battery

1Pull out the battery holder as shown below.

Pinch B inward while pulling the battery holder out from A.

Note:

To prevent leakage of fluid from the lithium battery, remove the battery when not using the remote control unit for long periods of time (one month or more). If the fluid should leak, carefully wipe it from the battery case, then insert a new lithium battery.

A

B

Warning (lithium battery)

2Remove the old battery, then insert the new battery into the battery holder.

Make sure that the »side is facing upwards.

CR2025

Lithium battery (CR2025)

3Fit the battery holder back into place.

62

Keep out of the reach of children.

Contact a physician immediately if a battery should be swallowed.

Do not take apart, dispose of in flames, charge, heat, solder or short-circuit.

Remove the battery if the equipment isn’t going to be used for a month or more.

Caution!

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer’s instructions.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

En

Page 62
Image 62
Pioneer PDV-20 Replacing the battery, Pull out the battery holder as shown below, Fit the battery holder back into place