Pioneer PDV-20 Mpeg Out, Digital Out, Audio DRC, Set in Setup Navigator Default Mpeg, Pcm

MPEG Out

•Set in Setup Navigator (Default: MPEG

3 PCM)

Audio1 2 Video Language General Other
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out	MPEG
	MPEG 3 PCM
i Changes MPEG audio output mode
Move	SETUP	Exit

You only need to make this setting if you connected this system to another component (AV amplifier, etc.) using the optical digital out.

If your AV amplifier (or other connected component) is MPEG audio compatible, set to MPEG, otherwise set to MPEG 3

PCM.

Digital Out

• Default setting: On

Audio1 2 Video Language General Other
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Digital Out	On
	Off
Move	SETUP	Exit

You can disable all digital audio output by setting this to Off.

Audio DRC

• Default setting: On

Audio1Audio2 Video Language General Other
Audio DRC	High
	Medium
	Low
	Off
i Dynamic playback at low volume
Move	SETUP	Exit

The dynamic range of a source is the difference between the quietest and the loudest sounds. The dynamic range of Dolby Digital soundtracks can be very great. This makes them exciting, but it also means that when you turn the volume down you can easily lose quiet dialog. Switch on Dynamic Range control to even out the soundtrack volume.

•High – the dynamic range is reduced by a large amount (good for listening at very low volume).

•Medium – mid setting.

•Low – the dynamic range is reduced by a small amount.

•Off – default setting (no change to the dynamics).

44

En