58.AUTO ID SET START

Function

External control apparatus sets up ID automatically to two or more plasma monitors.

Transmission Data

5FH 80H 60H F0H 01H DATA00 CKS

DATA00

00H~FFH: ID of a master*1 is set up.

*: When you use it by the multi-system, please remove the link input of a master*1.

*1: “Master” means the 1st set of PDP at the time of cable connection at the time of AUTO ID execution.

59.PLE LINK

Function

External control apparatus sets up equally PLE between two or more plasma monitors.

Transmission Data

DFH 80H 60H F1H 03H DATA00 to DATA02 CKS

DATA00 00H:PLE LINK ON 01H:PLE LINK OFF

DATA01 FFH

DATA02 FFH

*: This command is premised on the system configuration of two or more plasma monitor being a multi-system. When renewal of the PSC data based on this command is not carried out during a certain fixed period (about 2 seconds) during PLE LINK enforcement, each plasma monitor sets PSC data as FFH. Since this command is one-way traffic, there is no ACK.

*DATA01: Please set up FFH, when you publish this command from external control apparatus. A master*1 sets up its own PSS data. As compared with its own PSS data, the plasma monitor after the master that received this command sets up the data of the larger one, and equips the output of a command with it.

*DATA02: Please set up FFH, when you publish this command from external control apparatus. The 1st round which PSS data has not decided is FFH.

*1: “Master” means the 1st set of PDP at the time of cable connection at

60