06Other connections
Switching components on and off using the 12 volt trigger
You can connect components in your system to this receiver through a 12 volt trigger. If you turn the power to a connected component on, the power to this receiver is also turned on. This receiver will not turn on if you turn a connected component off while this receiver is
currently off.1
12V
TRIGGER
SPEAKER R |
FM UNBAL 75
12V
TRIGGER
•Connect the 12V TRIGGER jack of this receiver to the 12V trigger of another component.
Use a cable with a mono
Note
1When this system is already on, switching the connected component on will have no effect (switching the connected component off will have no effect in any case).
20
En