Pioneer SX-SW330 Additional information, Installation and maintenance, Button, What it does

Additional information

Installation and maintenance

Hints on installation

We want you to enjoy using this system for years to come, so please bear in mind the following points when choosing a location:

Do...

Use in a well-ventilated room.

Place on a solid, flat, level surface, such as a table, shelf or stereo rack.

Don’t...

Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances.

Place on a window sill or other place where the system will be exposed to direct sunlight.

Use in an excessively dusty or damp environment.

Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.

Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna.

Use in a kitchen or other room where the system may be exposed to smoke or steam.

Use on a thick rug or carpet, or cover with cloth—this may prevent proper cooling of the system unit.

Place on an unstable surface, or one that is not large enough to support all four of the system unit’s feet.

Setting up the remote to control your

TV

You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table on the following page.

VOLUME

DVD/DVR1 DVD/DVR2 DIGITAL ANALOG

	FM/AM
	SLEEP
ENTER	CLEAR
SETUP	SR
	TUNE
ST	ST
	ENTER
SOUND	TEST
	TONE
	TUNE
SOUND
RETRIEVER

SURROUND ADVANCED F.S.SURR MCACC

CHANNELVOLUME

TVINPUT

TV CONTROL

09

English

1Switch on your TV.

2Press and hold down the CLEAR button, then enter the maker code for your TV.

•If the maker’s name of your TV doesn’t appear in the table, you will not be able to use this remote to control your TV.

3 Point the remote towards your TV and press TV to check that the remote works with your TV.

If the remote is set up correctly, the TV should switch off. If it doesn’t and there is another code given for your maker, repeat step 2 with a new code.

Using the TV remote control buttons

The table below shows how to use this remote control with your TV.

Button	What it does
TV	Press to switch the TV on/off (standby)
INPUT	Press to change the TV’s video input
TV VOLUME	Use to adjust the TV volume
TV CHANNEL	Use to change TV channels

27

En