Pioneer VSX-1023-K, VSX-823-K 51

Home Menu

Tip

Confirm your selected setup option.

The Input Assign menu

4 The test tones will start after you press ENTER. After the

• You can change the channel levels at any time by press

Assigns input function for analog audio input terminal and

volume increases to the reference level, test tones will be

, then press CH SELECT and LEV +/– on the

output.

RECEIVER

component video input terminal (component video input

remote control. You can also press CH SELECT and use /

terminal for VSX-1023 only).

2c . Channel

Level

 to select the channel, and then use / to adjust the

• For the assignment of the digital signal inputs, see

Test

Tone

[ Manual ]

channel levels.

Selecting the audio input signal on page 25.

Please

Wait . . .20

Speaker Distance

Analog Input

Caution

For good sound depth and separation from your system, you

ANALOG IN1 audio input terminal is assigned to CD under

Loud

test tones

will

output.

need to specify the distance of your speakers from the

factory settings, but this can be changed to TV input.

Return

listening position. The receiver can then add the proper delay

Select ‘Input Assign’ from the Home Menu.

needed for effective surround sound.

Adjust the level of each channel using /.

5 If you selected Manual, use / to switch speakers. The

Select ‘Manual SP Setup’ from the Home Menu.

2 Select ‘Analog Input’ from the Input Assign menu.

Auto setup will output test tones in the order shown on-

Select ‘Speaker Distance’ from the Manual SP Setup

3 . Input Assign

3a . Analog

Input

screen:

2 menu.

a . Analog Input

Analog

b . Component Input

2c . Channel

Level

2 . Manual SP Setup

2d . Speaker Distance

Front L

0dB

a . Speaker

Setting

Front L

10.0 ft

Center

[

0dB

]

b . X.Over

Center

[

10.0 ft

]

Front R

[

0dB

]

c . Channel

Level

Front R

[

10.0 ft

]

Surround R

[

0dB

]

d . Speaker

Distance

Surround R

[

10.0 ft

]

Surr. Back R

[

– – –

]

Surr. Back R

[

– – – –

]

Return

Surr. Back L

[

– – –

]

Surr. Back L

[

– – – –

]

VSX-1023

Surround L

[

0dB

]

Surround L

[

10.0 ft

]

Subwoofer

[

0dB

]

Subwoofer

[

10.0 ft

]

Return

Select the desired input option for the ANALOG IN1

Adjust the level of each speaker as the test tone is

3 audio input terminal.

Adjust the distance of each speaker using /.

emitted.

When you’re finished, press RETURN.

Note

You can adjust the distance of each speaker in 0.1 feet

4 You return to the Input Assign menu.

increments.

• If you are using a Sound Pressure Level (SPL) meter, take

Note

When you’re finished, press RETURN.

the readings from your main listening position and adjust

• When playing analog input audio, switch to the CD or TV

the level of each speaker to 75 dB SPL (C-weighting/slow

You return to the Manual SP Setup menu.

input menu, press

and press SIGNAL SEL

reading).

RECEIVER

several times to choose A (Analog). (see Selecting the audio

• The subwoofer test tone is output at low volumes. You may

input signal on page 25)

need to adjust the level after testing with an actual

soundtrack.	Component Input (VSX-1023 only)

6 When you’re finished, press RETURN. You return to the Manual SP Setup menu.

COMPONENT VIDEO IN1 input terminal is assigned to DVD under factory settings, but this can be changed to SAT/CBL input.

1 Select ‘Input Assign’ from the Home Menu.