Pioneer VSX-1023-K, VSX-823-K 8

1		Controls and displays
ADVANCED SURROUND – Switches between the various	25 PRESET information or input signal indicator	HDMI – Lights when an HDMI signal is selected. Blinks
surround modes (page 35).	Shows the preset number of the tuner or the input signal type,	when an HDMI signal is selected and selected HDMI input
15 ECO	etc.	is not provided.
Switches between ECO Mode 1/ECO Mode 2. When ECO	26 Character display	31 Up Mix indicator (VSX-1023 only)
Mode is turned ON, the display will go dark (page 35).	Displays various system information.	Lights when the Up Mix function is set to ON (page 36).
16 iPod iPhone iPad DIRECT CONTROL	27 DTS indicators	32 DIR.
Change the receiver’s input to the iPod and enable iPod	DTS – Lights when a source with DTS encoded audio	Lights when the DIRECT or PURE DIRECT mode is switched
operations on the iPod (page 29).	DTS – Lights when a source with DTS encoded audio	on (page 35).
operations on the iPod (page 29).	signals is detected.	on (page 35).
17 iPod/iPhone/iPad terminals	signals is detected.
17 iPod/iPhone/iPad terminals	HD – Lights when a source with DTS-EXPRESS or DTS-HD
Use to connect your Apple iPod/iPhone/iPad or USB mass	encoded audio signals is detected.
storage device as an audio source (page 21).	ES – Lights to indicate DTS-ES decoding.
18 HDMI input/MHL connector	ES – Lights to indicate DTS-ES decoding.
18 HDMI input/MHL connector	96/24 – Lights when a source with DTS 96/24 encoded
Use for connection to a compatible HDMI device (Video	audio signals is detected.
camera, etc.) (page 22). An MHL-compatible mobile device	audio signals is detected.
camera, etc.) (page 22). An MHL-compatible mobile device	NEO:6 – When one of the NEO:6 modes of the receiver is
can also be connected here using a MHL cable (sold	NEO:6 – When one of the NEO:6 modes of the receiver is
can also be connected here using a MHL cable (sold	on, this lights to indicate NEO:6 processing (page 34).
separately) (page 22).	on, this lights to indicate NEO:6 processing (page 34).
separately) (page 22).	28 Dolby Digital indicators
	28 Dolby Digital indicators

Display

19PHASE

Lights when the Phase Control is switched on (page 36).

20AUTO

Lights when the Auto Surround feature is switched on (page 34).

21 Tuner indicators

ST – Lights when a stereo FM broadcast is being received in auto stereo mode (page 33).

TUNE – Lights when a normal broadcast channel.

PRESET – Shows when a preset radio station is registered or called.

MEM – Blinks when a radio station is registered.

kHz/MHz – Lights when the character display is showing the currently received AM/FM broadcast frequency.

22 ZONE (VSX-1023 only)

Lights when the MULTI-ZONE feature is active (page 54).

23 Speaker indicators

Shows if the speaker system is on or not (page 15).

24 Sleep timer indicator

Lights when the receiver is in sleep mode (page 9).

2D – Lights when a Dolby Digital encoded signal is detected.

2D+ – Lights when a source with Dolby Digital Plus encoded audio signals is detected.

2HD – Lights when a source with Dolby TrueHD encoded audio signals is detected.

EX (VSX-1023 only) – Lights to indicate Dolby Digital EX decoding.

2PLII(x) (VSX-1023 only) – Lights to indicate 2Pro Logic

IIdecoding. Light will go off during 2Pro Logic IIz decoding (see Listening in surround sound on page 34 for more on this).

2PLII (VSX-823 only) – Lights to indicate 2Pro Logic II decoding. (see Listening in surround sound on page 34 for more on this).

29ADV.S.

Lights when one of the Advanced Surround modes has been selected (see Using the Advanced surround on page 35 for more on this).

30 SIGNAL SELECT indicators

DIGITAL – Lights when a digital audio signal is selected. Blinks when a digital audio signal is selected and selected audio input is not provided.