11

 

 

 

 

 

 

Additional information

 

 

 

 

VSX-1023

VSX-1023

 

 

 

 

Resetting the main unit

 

 

 

 

 

 

Use this procedure to reset all the receiver’s settings to the

 

 

 

 

factory default. Use the front panel controls to do this.

 

 

 

 

• For instructions on resetting the network connection

 

 

 

 

settings, see Factory Reset on page 45.

 

 

 

 

Manufactured under license under U.S. Patent Nos: 5,956,674;

 

 

 

 

 

 

 

1 Switch the receiver into standby.

 

 

Manufactured under license from Dolby Laboratories. “Dolby”,

 

 

 

5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;

 

 

 

 

 

“Pro Logic”, “Surround EX”, and the double-D symbol are

 

7,392,195; 7,272,567 & other U.S. and worldwide patents

 

While holding down BAND, press and hold

 

 

trademarks of Dolby Laboratories.

 

issued & pending. DTS-HD, the Symbol, & DTS-HD and the

2 STANDBY/ON for about two seconds.

 

 

 

 

 

 

 

Symbol together are registered trademarks & DTS-HD Master

3

 

 

 

VSX-823

 

When you see RESET? appear in the display, press

 

Audio is a trademark of DTS, Inc. Product includes software.

AUTO SURROUND/STREAM DIRECT.

 

 

 

 

© DTS, Inc. All Rights Reserved.

 

OK? shows in the display.

 

 

 

 

VSX-823

4

 

 

 

 

 

Press ALC/STANDARD SURR to confirm.

 

 

 

 

 

OK appears in the display to indicate that the receiver

 

 

 

 

 

has been reset to the factory default settings.

 

Manufactured under license from Dolby Laboratories. Dolby,

 

 

 

 

 

 

 

 

Manufactured under license under U.S. Patent Nos: 5,956,674;

 

Important

 

 

Pro Logic, and the double-D symbol are trademarks of Dolby

 

• If the Control with HDMI function is set to

ON, the HDMI

 

Laboratories.

 

5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;

 

 

 

7,392,195; 7,272,567 & other U.S. and worldwide patents

 

 

 

function’s Standby Through is set to anything other than

 

 

 

 

 

 

issued & pending. DTS-HD, the Symbol, & DTS-HD and the

OFF, or the Network Standby is set to ON, you may not be

 

 

 

 

 

 

Symbol together are registered trademarks of DTS, Inc. Product

able to reset the unit. In this case, reset either by turning

 

 

 

includes software. © DTS, Inc. All Rights Reserved.

OFF the Control with HDMI function, or by putting the unit

 

 

 

 

 

 

 

 

into standby mode by turning off the power of all the

 

 

 

 

connected devices, and resetting after the HDMI indicator

 

 

 

 

on the front panel turns off.

 

 

 

 

 

Cleaning the unit

•Use a polishing cloth or dry cloth to wipe off dust and dirt.

•When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.

•Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface.

66