Other connections
Chapter 9:
Other connections
09
English
Caution
•Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet.
•Be careful not to allow any contact between speaker wires from different terminals.
•You can use speakers with a nominal impedance between
Second Zone speaker B setup
Switching the speaker system
If you selected SB 2ND Z in Surround back speaker setting on page 27, three speaker system settings are possible using the SPEAKERS button. If you selected SB NORM. or SB BIAMP, the speaker system is fixed as SP A or SP AB (respectively). The options
below are for the SB 2ND Z setting only.1
•Use the SPEAKERS button on the front panel to select a speaker system setting.
| ANALOG | MIDNIGHT/ |
|
|
|
DIMMER | ATT | LOUDNESS | SPEAKERS |
|
|
MUTE | TUNER | TONE | QUICK | SETUP | RETURN |
EDIT | SETUP | ||||
|
|
| MULTI JOG |
|
|
Deutsch Français Italiano
After selecting SB 2ND Z in Surround back speaker setting on page 27, you can use the speakers connected to the (surround back) B speaker terminals on the rear panel to listen to stereo playback in another room. See Switching the speaker system below for the listening options with this setup.
1Connect a pair of speakers to the surround back speaker terminals on the rear panel.
Connect them the same way you connected your speakers in Connecting the speakers on page 14. Make sure to review Hints on speaker placement on page 15 when placing the speakers in another room.
2Select SB 2ND Z from the ‘SB. SYSTEM’ menu.
See Surround back speaker setting on page 27 to do this.
Press repeatedly to choose a speaker system option:
• SP A – Sound is output from the speakers connected to the A speaker terminals (multichannel playback is possible).
• SP B – Sound is output from the two speakers connected to speaker system B (only stereo playback is possible).
• SP AB – Sound is output from speaker system A (up to 5 channels, depending on the source), the two speakers in speaker system B, and the subwoofer. Multichannel sources (heard through speaker system A) are downmixed for stereo output from speaker system B.
Nederlands Español
Note
1 • The subwoofer output depends on the settings you made in Speaker setting on page 28. However, if SP B is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).
•Depending on the Surround back speaker setting on page 27 output from the surround back
•All speaker systems (except SB 2ND Z connections) are switched off when headphones are connected.
33
En
