Connecting your equipment | 0202 |
Analog audio cables
Use stereo RCA phono cables to connect analog audio components. These cables are typically red and white, and you should connect the red plugs to R (right) terminals and white plugs to L (left) terminals.
Video cables
Standard RCA video cables
These cables are the most common type of video connection and are used to connect to the composite video terminals. The yellow plugs distinguish them from cables for audio.
About video outputs connection
This receiver is not loaded with a video converter. When you use component video cables or HDMI cables for connecting to the input device, the same cables should be used for connecting to the TV.
English
White (Left)
L |
|
R | AUDIO |
|
Red (Right)
VIDEO
Yellow
The signals input from the analog (composite and component) video inputs of this unit will not be output from
the HDMI OUT.
Playback
component
Digital audio cables
Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver.
Coaxial digital | COAXIAL |
|
IN | OPTICAL | |
audio cable |
| |
|
| |
|
| IN |
|
| Optical cable |
Note
•When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.
•When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.
•You can also use a standard RCA video cable for coaxial
digital connections.
Component video cables
Use component video cables to get the best possible color reproduction of your video source. The color signal of the TV is divided into the luminance (Y) signal and the color (PB and PR) signals and then output. In this way, interference between the signals is avoided.
| COMPONENT |
|
| Y | VIDEO |
| PB | |
Green (Y) |
| PR |
|
| |
Blue (PB) | Red (PR) | |
Terminal for connection with source device
IN | IN |
| IN |
|
| ||
|
|
| |
HDMI | Y | PB PR |
|
COMPONENT VIDEO | VIDEO | ||
OUT |
|
| MONITOR |
|
| OUT | |
|
|
| |
| MONITOR |
|
|
| OUT Y | PB PR |
|
HDMI | COMPONENT VIDEO | VIDEO | |
Terminal for connection with TV monitor
The OSD will
not appear.
TV
Video signals can be output.
13
En
