Pioneer VSX-521-K Basic Setup, 0303, Chapter, Canceling the demo display, English

Basic Setup

Chapter 3:

Basic Setup

Canceling the demo display

The display on the front panel shows various information (demo displays) when the receiver is not operating.

TV

RECEIVER SLEEP SOURCE CONTROL

RECEIVER	INPUT SELECT		DTV/TV
			NPUT
BD	DVD	TV

CH

PARAMETER

TOP

MENU

T

E

S

E

R

P

HOME

MENU

SETUP

TUNE

ENTER

TUNE

TOOLS VOLUME

MENU

P

R

E

S

E

T

BAND

RETURN

MUTE

4Press RECEIVER on the remote control, then press the

SETUP button.

The System Setup menu appears on your TV. Use ///

 and ENTER on the remote control to navigate through the

screens and select menu items. Press RETURN to exit the

current menu.

• Press SETUP at any time to exit the System Setup menu.

If you cancel the Auto MCACC setup at any time, the

0303

English

You can turn off the demo display. For details, see The FL Demo Mode menu on page 33.

•The demo mode is canceled automatically when the Auto MCACC setup is performed (see below).

Automatically setting up for surround sound (MCACC)

The Auto Multi-Channel Acoustic Calibration (MCACC) setup measures the acoustic characteristics of your listening area, taking into account ambient noise, speaker size and distance, and tests for both channel delay and channel level. After you have set up the microphone provided with your system, the receiver uses the information from a series of test tones to optimize the speaker settings and equalization for your particular room.

CAUTION

•The test tones used in the Auto MCACC setup are output at high volume.

Important

•The OSD will not appear if you have connected using the HDMI output to your TV. Use composite or connections for system setup.

•The Auto MCACC setup will overwrite any existing speaker settings you’ve made.

•If you connected either the surround back speaker or the front height speaker, make sure that the Pre Out setting is correctly set before performing the Auto MCACC setup (see page 33). (Here is an explanation using the OSD screen for a surround back speaker connection.)

1Switch on the receiver and your TV.

2Switch the TV input to the input that connects this receiver to the TV through the corresponding composite or component cable.

3Connect the microphone to the MCACC SETUP MIC jack on the front panel.

Make sure there are no obstacles between the speakers and the microphone.

PRESET ENTER

SOUND

RETR EVER

MASTER

VOLUME

PORTABLE /

MCACC SETUP MIC

Microphone

Tripod

If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position. Otherwise, place the microphone at ear level using a table or a chair.

receiver automatically exits and no settings will be made.

• The screensaver automatically starts after three minutes

of inactivity.

5Select ‘Auto MCACC’ from the System Setup menu, then press ENTER.

System Setup

1.Auto MCACC 2.Manual SP Setup 3.Input Assign 4.Pre Out Setting 5.HDMI Setup 6.Auto Power Down 7.FL Demo Mode

Return

•MIC IN blinks when the microphone is not connected to MCACC SETUP MIC jack.

Try to be as quiet as possible after pressing ENTER. The system outputs a series of test tones to establish the ambient noise level.

6Follow the instructions on-screen.

•Make sure the microphone is connected.

•Make sure the subwoofer is on and the volume is turned up.

•When using surround back or front height speakers, turn on the power to the amplifier to which the surround back or front height speakers are connected, and adjust the sound level to the desired level.

•See below for notes regarding background noise and other possible interference.

19

En