Other connections
Chapter 10:
Other connections
10
English
Caution
•Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in components should be the last connection you make with your system.
•Do not allow any contact between speaker wires from different terminals.
Connecting an iPod
This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod using the controls of this receiver.1
•Push down on the PUSH OPEN tab to access the iPod DIRECT USB terminal.
| VIDEO | L AUDIO R | iPod DIRECT | MCACC |
| USB | PORTABLE | ||
|
|
|
| PUSH |
|
|
|
| OPEN |
|
|
|
| MASTER |
|
|
|
| VOLUME |
|
|
| iPod DIRECT | MCACC |
VIDEO | L AUDIO | R | USB | PORTABLE |
Connecting your iPod to the receiver
1Set this receiver to the standby mode, and then use the USB cable (for iPod connection) to connect your iPod to the iPod DIRECT USB terminal on the front panel of this receiver.
For the cable connection, refer to also the operating instructions for iPod.
2Switch the receiver on and press the iPod input source button to switch the receiver to the iPod.
The front panel display shows Loading while the receiver verifies the connection and retrieves data from the iPod.
3Press TOP MENU to display iPod Top menu.
When the display shows Top Menu you’re ready to play music from the iPod.2
•If after pressing iPod the display shows No Connection, try switching off the receiver and reconnecting the iPod to the receiver.
Deutsch Français Italiano Nederlands
USB cable (for iPod connection)
This receiver
iPod
Music >
Extras >
Settings >
Shuffle Songs
Backlight
iPod
MENU
Español
Note
1• This system is compatible with the audio of an iPod and iPod nano portable device (fifth generation and above). However, that some of the functions may be restricted for some models. Note, however, compatibility may vary depending on the software version of your iPod. Please be sure to use the latest available software version.
•iPod is licensed for reproduction of
•Features such as the equalizer cannot be controlled using this receiver, and we recommend switching the equalizer off before connecting.
•Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience or loss of recorded material resulting from the iPod failure.
2The controls of your iPod will be inoperable when connected to this receiver (Pioneer shows in the iPod display).
57
En