Aiwa CX-NA71 Connecting Optional, Equipmentsources, Listening To External, Video/Aux, Md Jacks

CONNECTING OPTIONAL LISTENING TO EXTERNAL

EQUIPMENTSOURCES

I “Fr I 8“’’:AtT0uTPOWER1

ml ‘“”–

—SUPtH

WOOFER

~

Refer to the operating instructions of the connected equipment for details.

●The connecting cords are not supplied. Obtain the necessary connecting cords.

●Consult your local Aiwa dealer for optional equipment.

To play equipment connected to the VIDEO/AUX jacks or MD

jacks, proceed as follows.

1 Press the VIDEO/AUX or MD button.

When a equipment connected to the VIDEO/AUX jacks is

played: press the VIDEO/AUX button.

VIDEO/AUX, MD JACKS

This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, MD players, VCRS, TV, etc.).

Connect the red plug to the R jack, and the white plug to the L jack.

When connecting a turntable

Use an Aiwa turntable equipped with a built-in equalizer amplifier.

When a equipment connected to the MD jacks is played:

press the MD button.

2’ Play the connected equipment.

To change a source name in the display

When the VIDEO/AUX button is pressed, VIDEO is displayed initially. It can’be changed to’AUX or TV.

With the power on, press the POWER button while pressing the VIDEO/AUX button.

Repeat the procedure to select one of the names.

LINE OUT JACKS

This unit can output analog sound signal through these jacks. Use a cable with RCA phono plugs to connect audio equipment with LINE IN (analog input) jacks.

m

Do not connect an equipment to the LINE OUT terminals and

VI DEO/AUX terminals simultaneously. Otherwise, noise is generated and malfunction occurs.

CD DIGITAL OUT (OPTICAL) JACK

This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (digital amplifier, DAT deck, MD recorder, etc.).

Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack-

To adjust the sound level of the external source

When the sound level of the external source is much higher or

much lower than that of other function sources, adjust it as ‘

follows. ~

1Press the VIDEO/AUX or MD button and play the equipment.

2Presss the++ or ➤> button so that the sound level becomes the same as that of other function sources.

m

During recording, the sound level can not be adjusted. .

.,

—

When the CD DIGITAL OUT (OPTICAL) jack is not being

used \

Attach the supplied dust cap.

SUPER WOOFER 4 JACK

Connect an optional powered sub woofer with a built-in-amplifier

to the jack.

23	.	,.
	ENGLISH