Aiwa CX-NA71 Continuous Play, Music Sensor, Insert tapes into deck 1 and deck, DOLBY NR system

MUSIC SENSOR

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

Press the < or - button during playback referring to the playback side indicator (+ or *) on the display.

For example, when the - button is pressed while F is displayed, playback of the next track starts.

Music sensor function may not be able to detect tracks under the following conditions:

●Blanks of less than 4 seconds between tracks

●Noisy blanks

●Long passages of low-end sound

c Low overall recording levels

CONTINUOUS PLAY

After playback on one deck finishes, the tape in’the other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press the TAPE/DECKl/2 button to select the deck to be played back first.

3 Press the REV MODE button to select 1].

4 Press the 4 F button to start playback.

Playback continues until the ■ button is pressed.

About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Type II tape	\
	Tab for side A
detection	>ti
slot
	/

To record on the tape again, cover the tab openings with adhesive tape, etc. (On l-ype 11tapes, take care not to cover the Type II tape detection slot.)

●120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recol’nmended.

●Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break cxjam in the mechanism.

DOLBY NR system

The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system.

.> ENGLISH 14