Aiwa CX-NA71 Connections, EiiEa, Check your system and accessories, Before connecting the AC cord

CONNECTIONS

Check your system and accessories

-.

—(’2o (2

Before connecting the AC cord

The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage. -

IMPORTANT

Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord in the end.

To position the antennas

FM feeder antenna:

Extend this antenna horizontally in a T-shape and fix its ends to

the wall,, AM loop antenna:

Position for the best reception.

To stand the AM antenna on a surface

Fix the claw to the slot.

m

●Be sure to connect the speaker cords correctly. Improper

connections can cause short circuits in the SPEAKERS terminals.

c Do not leave objects generating magnetism near the speakers as these object may be damaged.

●Do not bring the FM antenna near metal objects or curtain rails.

●Do not bring the AM antenna--near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.

●Do not unwind the AM antenna wire.

~CX-NA71 Compact disc stereo cassette reciever

@ SX-NA74 Front speakers (For NSX-A740, NSX-A74) @ SX-R240 Surround speakers (For NSX-A74 only) @ SX-ANA72 Front speakers (For NSX-A72)

@ SX-FNA71 Front speakers (For NSX-A71 )

To connect with NSX-A72 or NSX-A71 + page 4. To connect with NSX-A740 or NSX-A74 + page 5.

II

EiiEa

Remote control AM antenna FM antenna

Operating Instructions, etc.

Owner’s record ~

For your convenience, record the model number and serial

number (you will find them on the rear of your set) in the space , provided below, Please refer to them when you contact yourAiwa dealer in case of difficulty.

Model No, I Serial No. (Lot No.)

CX-NA71

SX-NA741SX-ANA721SX-FNA71

SX-R240 (NSX-A74 only)

~ENGLISH