Connecting up | 03 |
1Use an HDMI cable to connect the HDMI IN 1/2 interconnect on this receiver to an HDMI output on your HDMI component.
2Use an HDMI cable to connect the HDMI OUT interconnect on this receiver to an HDMI interconnect on a
•The arrow on the cable connector body should be facing left for correct alignment with the connector on the player.
3
On the rear panel, you must connect to the audio jacks from a set of audio/video inputs (for example, DVR/VCR as shown in the illustration).
•Without this connection, HDMI audio will still be output from your TV or flat panel TV (though no sound will be heard from this receiver).
4Assign the HDMI input(s) you connected to the corresponding input source.
After connecting, you must specify which input(s) you are using for your HDMI component in Assigning the HDMI inputs on page 65.
5Use the input source buttons to select the input source you assigned in the previous step, then press SIGNAL SEL (SIGNAL SELECT) after press RECEIVER button to select the audio input signal. You can also use the front panel controls to do this (see Choosing the input signal on page 36).
•
•If the video signal does not appear on your TV or flat panel TV, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be displayed. In this case, use a (analog) composite connection.
•The signals input from the analog (composite and component) video inputs of this unit will not be output from the
HDMI OUT.
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV,
HDMI has the capability to support standard, enhanced, or
HDMI, the HDMI logo and
English Deutsch Français Italiano Nederlands Español
17
En