Controlling the rest of your system
Chapter 9:
Controlling the rest of your system
09
English Deutsch
Operating other Pioneer components
VSX-918V model only
Many Pioneer components have SR CONTROL jacks which can be used to link components together so that you can use just the remote sensor of one component. When you use a remote control, the control signal is passed along the chain to the appropriate component.1
Note that if you use this feature, make sure that you also have at least one set of analog audio or video jacks connected to another component for grounding purposes.
CONTROL | CONTROL |
OUT | IN |
| |
IN | OUT |
Other Pioneer products with CONTROL terminals
Remote | Connect to CONTROL | |
control | ||
terminal of other | ||
unit | ||
Pioneer products | ||
|
Setting the remote to control other components
Most components can be assigned to one of the MULTI CONTROL buttons using the component’s manufacturer preset code stored in the remote.
However, please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the remote control will not work for the model that you are using.2
Note
•You can cancel or exit any of the steps by pressing RECEIVER. To go back a step, press RETURN.
•After one minute of inactivity, the remote automatically exits the operation.
Français Italiano Nederlands Español
Note
1• If you want to control all your components using this receiver’s remote control, refer to Setting the remote to control other components below.
• If you have connected a remote control to the CONTROL IN jack (using a
2TV codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the TV or TV CTRL button.
49
En
