Listening to your system | 05 |
Setting | What it does | Option(s) | |
DUAL MONOd | Specifies how dual mono encoded Dolby Digital | ch1 – | |
| soundtracks should be played. | Channel 1 is heard only | |
|
|
| |
|
| ch2 – | |
|
| Channel 2 is heard only | |
|
|
| |
|
| Lch1.Rch2 – | |
|
| Both channels heard | |
|
| from front speakers | |
|
|
| |
DRC | Adjusts the level of dynamic range for movie soundtracks | OFF | |
(Dynamic Range | optimized for Dolby Digital and DTS (you may need to use |
| |
MAX | |||
Control) | this feature when listening to surround sound at low | ||
| volumes). |
| |
| MID | ||
|
| ||
|
|
| |
Dialog Enhancemente | Localizes dialog in the center channel to make it stand out | OFF | |
| from other background sounds in a TV or movie |
| |
| ON | ||
| soundtrack. | ||
|
|
| |
Sound Delay | Some monitors have a slight delay when showing video, so | 0.0 to 6.0 (frames) | |
the soundtrack will be slightly out of sync with the picture. | 1 second = 30 frames | ||
| By adding a bit of delay, you can adjust the sound to match | (NTSC) | |
| the presentation of the video. |
| |
|
|
| |
LFE ATT | Some Dolby Digital and DTS audio sources include ultra- | LFEATT 0 (0 dB) | |
(LFE Attenuate) | low bass tones. Set the LFE attenuator as necessary to |
| |
LFEATT 10 | |||
| prevent the | ||
| from the speakers. | LFEATT ** (OFF) | |
| The LFE is not limited when set to 0 dB, which is the |
| |
| recommended value. When set to |
| |
| limited by the respective degree. When OFF is selected, no |
| |
| sound is output from the LFE channel. |
| |
|
|
| |
HDMI | Specifies the routing of the HDMI audio signal out of this | AMP | |
receiver (amp) or through to a TV or flat panel TV. |
| ||
THRU (Through) | |||
|
| ||
|
|
|
a. You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.
b. The tone controls are only available when Stereo, Auto level control stereo mode or Front Stage Surround Advance mode are selected (except when STEREO is selected using AUTOSURR.).
c.Only available with
d.This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
e.You can change the Dialog Enhancement options at any time by using DIALOG button.
English Deutsch Français Italiano Nederlands Español
35
En