The System Setup menu | 06 |
1Select ‘Speaker Setting’ from the Manual SP Setup menu.
| 3.Manual SP | Setup |
|
|
| 3a.Speaker | Setting |
| |||||||
|
|
|
|
|
|
|
| Front |
|
|
| ||||
|
| a.Speaker | Setting |
|
|
|
|
| SMALL | ||||||
|
| b.Crossover Network |
|
|
|
| Center | [ | SMALL | ] |
|
|
|
| |
|
| c.Channel | Level |
|
| Surr | [ SMALL ] |
|
|
|
| ||||
|
| d.Speaker | Distance |
|
| SUB W. | : | YES |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| :Return |
|
|
|
|
|
| :Finish | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2Choose the set of speakers that you want to set then select a speaker size.
Use to select the size (and number) of each of the following speakers:
•Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a
subwoofer. Select SMALL to send the bass frequencies to the subwoofer.1
•Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the other speakers).
•Surr – Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect surround speakers choose NO (the sound of the surround channels is sent to the other speakers).
•SUB W. – LFE signals and bass frequencies of channels set to SMALL are output from the subwoofer when YES is selected (see notes below). Choose the PLUS setting if you want the subwoofer to output bass sound continuously or you want deeper bass (the bass frequencies that would normally come out the front and
center speakers are also routed to the subwoofer). If you did not connect a subwoofer choose NO (the bass frequencies are output from other speakers).
3When you’re finished, press RETURN. You return to the Manual SP Setup menu.
Tip
•If you have a subwoofer and like lots of bass, it may seem logical to select LARGE for your front speakers and PLUS for the subwoofer. This may not, however, yield the best bass results. Depending on the speaker placement of your room you may actually experience a decrease in the amount of bass due to low frequency cancellations. In this case, try changing the position or direction of speakers. If you can’t get good results, listen to the bass response with it set to PLUS and YES or the front speakers set to LARGE and SMALL alternatively and let your ears judge which sounds best. If you’re having problems, the easiest option is to route all the bass sounds to the subwoofer by selecting SMALL for the front speakers.
Crossover Network
• Default setting: 100Hz
This setting decides the cutoff between bass sounds playing back from the speakers selected as LARGE, or the subwoofer, and bass sounds playing back from those selected as SMALL. It also decides where the cutoff will be for bass sounds in the LFE channel.2
English Deutsch Français Italiano Nederlands Español
Note
1If you select SMALL for the front speakers, the subwoofer will automatically be fixed to YES. Also, the center and surround speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.
2For more on selecting the speaker sizes, see Speaker Setting above.
43
En
