04Controls and displays
STEREO/DIRECT (pages
16 SIGNAL SELECT (page 25, 28)
Use to select between an analog or digital signal.
17MONITOR (page 37)
Press to switch tape monitoring on/off.
18 MIDNIGHT (page 26)
Use when listening to movie soundtracks at low volumes.
19 LOUDNESS (page 26)
Use to boost the bass and treble at low volumes.
20TONE (page 27)
Press this button to access the bass and treble controls, which you can then adjust with the
MULTI JOG/INPUT SELECTOR dial.
21QUICK SETUP (page 10)
22MASTER VOLUME
Display
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
SIGNAL AUTO
DIGITAL DIGITAL ANALOG DTS
DIGITAL |
PROLOGIC |
ADV.SURR. |
ATT | DIRECT | MONITOR |
|
| |
| MIDNIGHT | STEREO | TUNED |
| |
| LOUDNESS | MONO | SP | A |
dB
1011
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current component:
AUTO : Lights when AUTO signal select is on.
DIGITAL : Lights when a digital audio signal is detected.
2DIGITAL : Lights when a Dolby Digital signal is detected.
ANALOG : Lights when an analog signal is detected.
12 | 13 | 14 |
DTS : Lights when a source with DTS audio signal is detected.
2 DTS
When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal.
20
En