Controls and displays | 04 |
4 2 PRO LOGIC II
When the Standard mode of the receiver is on, this lights to indicate Prologic II decoding.
5 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of the input signal (can only be used with an analog signal).
6 DIRECT
Lights when source direct playback is in use. This function bypasses all tone, balance, DSP and Dolby Surround effects.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected.
9 Speaker indicator
Shows if the speaker system is on or not.
SP 3A means speakers are switched on. SP 3 means the headphones are connected.
10 Character display
11ADV. SURR (Advanced Surround) Lights when one of the Advanced Surround listening modes of the receiver is selected.
12LOUDNESS
Lights during Loudness listening.
13 TUNER indicators
STEREO : Lights when a stereo FM broadcast is being received in auto stereo mode.
MONO : Lights when the mono mode is set using the MPX button.
TUNED : Lights when a broadcast is being received.
14 Master volume level
Shows the overall volume level.
Depending on the level settings you make for each channel, the maximum level can range between
21
En