Setting the volume level of each channel (Adjusting the speaker volume balance)
memo
• Sound from the SUB WOOFER seems quite.
• The speaker volume can be adjusted without outputting the test tone by pressing CHANNEL LEVEL or
CHANNEL SELECT .
• Initial setting is 0 dB.
1
4
SOURCE
SELECT
CD | STANDBY/ON | CHANNEL | |
STATION | |||
| TV FUNC. | TV VOL. | |
TAPE | BAND | FREQ. | |
TUNER | MPX | CLASS | DIRECT |
.ACCESS | |||
DVD |
|
|
|
| 1 | 2 | 3 |
LD |
|
|
|
| 4 | 5 | 6 |
TV |
|
|
|
CONTROL TEST TONE |
|
| |
| 7 | 8 | 9 |
SURROUND | ATT. | CD DISC | |
| 0 |
|
|
FUNCTION |
| DSP MODE MUTING | |
CHANNEL |
|
| |
SELECT | LEVEL |
| |
RECEIVER |
|
| MASTER |
STANDBY/ON | EFFECT | VOLUME | |
AV | |||
REMOTE CONTROL UNIT | Î | ||
1 Press 
button.
2 Press VOL + or – to adjust the volume to an appropriate level.
3 Press TEST TONE to output the test tone.
The test tone is output in the following order.
3,5 |
|
| FL |
|
|
| CT |
|
|
| FR |
|
| |
|
|
|
|
|
|
|
|
| ||||||
2 |
|
| SW |
|
|
| SL |
|
|
| SR |
|
| |
|
|
|
|
|
|
|
|
|
| |||||
memo • Depending on the “SPEAKER setting mode” chosen, some | ||||||||||||||
|
| channels may not output test tone (refer to page 16). | ||||||||||||
• Test tone is only output in Dolby mode.
4 Adjust speaker levels so that you hear the test tone at the same volume from each speaker when seated in the main listening position.
The channel level ranges ± 10 dB.
memo
• Levels can be set for each surround mode.
•When both the DSP mode and Dolby Surroud mode are turned on, priority is given to the Dolby Surround mode.
5 Press TEST TONE to turn off the test tone.
20
<ARB7192>
