Sound Modes
Switching ANALOG/DIGITAL Signal Input
The input of the component set in the digital input setting (refer to page 19) can be switched to an analog or digital input signal by pressing the SIGNAL SELECT button.
1 Press SIGNAL SELECT on the front panel to select the input signal corresponding to the source component.
Each press switches between ANALOG and DIGITAL signal selection.
SIGNAL SELECT
ANALOG
SIGNAL SELECT
ANALOG
SP A
SIGNAL SELECT
| SIGNAL |
|
|
|
|
| SELECT |
| SIGNAL | SP A |
|
|
|
| SELECT |
|
|
|
|
|
|
|
|
| DIGITAL |
| DIGITAL |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 While SIGNAL SELECT is set to DIGITAL,
SIGNAL |
|
|
|
|
SELECT |
| SIGNAL | SP A |
|
|
| SELECT |
| When a Dolgy Digital signal is input. |
|
|
|
| |
DIGITAL |
| |||
|
| DIGITAL |
|
|
|
|
|
|
|
|
|
|
| |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
memo
•SIGNAL SELECT is fixed in the “ANALOG” position for components not assigned to one of the three digital input jacks.
•Because the audio from a karaoke microphone and LD recorded with analog audio only is not output from the digital output, set SIGNAL SELECT to “ANALOG”.
•This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, and 48kHz), digital signal formats. With digital signal formats other than these, set SIGNAL SELECT to “ANALOG”.
26
<ARB7192>
