Pioneer XRB3089-A Setting the Acoustic Calibration EQ manually, Select ‘OK’ to copy and confirm

The System Setup menu 06

2 Select CUSTOM1 or CUSTOM2 then use to select the setting you want to

copy.

2d.EQ	Data	Copy			2d.EQ	Data	Copy
TO			FROM		TO			FROM
CUSTOM1					CUSTOM1
			CUSTOM1					ALL CH ADJ
CUSTOM2		[ CUSTOM2		]	CUSTOM2		[	CUSTOM2	]
Start	Copy		[ OK	]	Start	Copy		[ OK	]
			:Cancel					:Cancel

•You can also copy from one custom setting to another. For more on the ALL CH ADJUST and FRONT ALIGN settings, see Setting the Acoustic Calibration EQ automatically on page 40.

3 Select ‘OK’ to copy and confirm.

Setting the Acoustic Calibration EQ manually

Before manually adjusting the Acoustic Calibration EQ, we recommend copying the ALL CH ADJUST or the FRONT ALIGN settings from the auto setup above (or from Automatically setting up for surround sound (MCACC) on page 8) to one of the custom settings. Instead of just a flat EQ curve, this will give you a reference point from which to start (see Copying your Acoustic Calibration EQ settings on page 40 for how to do this).

1Select ‘EQ CUSTOM1 Adjust’ or ‘EQ CUSTOM2 Adjust’ from the Manual MCACC setup menu.

2.Manual		MCACC			2e.EQ CUSTOM1 Adjust
	a.Fine	Ch	Level		Test Tone Type
	b.Fine SP		Distance			ALL CH	ADJUST
	c.EQ	AUTO Setting
	d.EQ	Data	Copy
	e.EQ	CUSTOM1		Adjust
	f .EQ	CUSTOM2		Adjust
	g.EQ	Data	Check
				:Return	ENTER:Next		:Cancel

2Select which method you would like to use to adjust the overall frequency balance. It is best to choose whichever one you copied to the custom setting in Copying your Acoustic Calibration EQ settings on page 40.

• ALL CH ADJUST – All the speakers can be
set independently so no special weighting	English
is given to any one channel. When
adjusting, test tones will sound for each
individual channel.
• FRONT ALIGN – Speakers are set in
accordance with the front speaker	Deutsch
settings. The sound of the test tone will
alternate between the left front (reference)
speaker and the target speaker.

3Select the channel(s) you want and adjust to your liking.

Français

2e.EQ CUSTOM1 Adjust

2e. EQ

CUSTOM1 Adjust

Test

Tone

Type:

Test

Tone

Type:

"ALL CH ADJUST"

"ALL CH ADJUST"

Left

[ Left

]

40Hz :

[ +1.0dB]

40Hz :

+1.0dB

125Hz :

[

0.0dB]

125Hz :

[

0.0dB]

250Hz :

[

0.0dB]

250Hz :

[

0.0dB]

4kHz :

[

0.0dB]

4kHz :

[

0.0dB]

13kHz :

[

0.0dB]

13kHz :

[

0.0dB]

TRIM :

[

0.0dB]

TRIM :

[

0.0dB]

Italiano

:Finish

:Finish

Use

to select the channel.

Use

to select the frequency and

to

boost or cut the EQ. When you’re finished, go

back to the top of the screen and use

to

Nederlands

select the next channel.

• The front speakers can’t be adjusted if you

selected FRONT ALIGN.

• The OVER indicator shows in the display if

the frequency adjustment is too drastic

Español

and might distort. If this happens, bring

the level down until OVER disappears from the display.

Tip

•Changing the frequency curve of one channel too drastically will affect the overall balance. If the speaker balance seems uneven, you can raise or lower channel levels using test tones with the

TRIM feature. Use		to select TRIM
then use	to raise or lower the

channel level for the current speaker.

4When you’re finished, press RETURN. You return to the Manual MCACC setup menu.

41

En