Pioneer XV-DV250 Getting started Using the on-screen displays, Playing discs, Menu

Getting started

Using the on-screen displays

For ease of use, this system makes extensive use of graphical on-screen displays (OSDs).

All the screens are navigated in basically the same way, using the cursor buttons ( , , ,

) to change the highlighted item and pressing ENTER to select it.1

Important

•Throughout this manual, ‘Select’ means use the cursor buttons to highlight an item on-screen, then press ENTER.

Button What it does

HOME Displays/exits the on-screen display

MENU

Changes the highlighted menu item

ENTER Selects the highlighted menu item

RETURN Returns to the main menu without saving changes

Tip

•The button guide at the bottom of every OSD screen shows you which buttons you’ll need to use for that screen.

Playing discs

The basic playback controls for playing DVD, CD, Video CD/Super VCD and MP3/WMA discs are covered here. Further functions are detailed in chapter 3.

1If the player isn’t already on, switch it on. If you’re playing a disc with video, also turn on your TV and make sure that it is set to the correct video input.

2 Press OPEN/CLOSE to load a disc.

01

Load a disc with the label side facing up, using		English
the disc tray guide to align the disc (if you’re
loading a double-sided DVD disc, load it with
the side you want to play face down).
3	Press (play) to start playback.	Deutsch
If you’re playing a DVD or Video CD/Super VCD,		Français
a menu may appear. See DVD-Video disc
menus and Video CD/Super VCD PBC menus on
page 8 to navigate these.
If you’re playing a WMA/MP3 disc, it may take
a few seconds before playing.		Italiano
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Playing a
JPEG slideshow on page 13 for more on this.
4	Adjust the volume.
Use the VOLUME control.		Nederlands
the remote for playing discs2. You can find
Basic playback controls
The following table shows the basic controls on
other playback features in the chapter 3.		Español
	• If the display shows RESUME or
Button What it does

Starts/resumes normal playback.

LAST MEM playback starts from the resume or last memory point (see Resume and Last Memory below).

Pauses/unpauses a disc.

Stops playback or cancels the resume function (if the display shows RESUME).

Press to start fast reverse scanning.

Press to start fast forward scanning.

Note

1The screen saver will appear after five minutes of inactivity.

2You may find with some DVD discs that some playback controls don’t work in certain parts of the disc.

7

En