Other connections09
32
En
Chapter 9
Other connections
Connecting external antennas
For an external AM antenna, use 5 m to 6 m of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Only use the included AM loop antenna.
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
Connecting auxiliary audio
components
Using the stereo analog inputs, you can
connect an external component such as a tape
deck or MD player for playback through this
system.
• Connect the (
LINE
2) AUDIO IN jacks to
the analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.
Using the SCART AV output
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.1
• Use a commercially available SCART cable
to connect the (
LINE
1) AV CONNECTOR to
your TV.
Outdoor antenna
5 m to 6 m
Indoor
antenna
(vinyl-coated
wire)
AM LOOP
ANTENNA
PAL connector
Note
1SCART cables are available in several configu rations. Make sure that the one you get will work with this system and your TV/
monitor (see SCART pin assignment below).
SURROUND
SUB
WOOFER
FRONT CENTER
SPEAKERS (4
Ω - 6 Ω)
R
L
R
R
L
L
RL
AV CONNECTOR
VIDEO OUT
OUT
LINE
OUT
LINE 2
IN
LINE 1
CONTROL
AUDIO
To audio
output
Tape deck, etc.
AUDIO
R
L
R
L
AV CONNECTOR
VIDEO OUT
OUT
LINE
OUT
LINE 2
IN
LINE 1
7
5 Ω
CONTROL
TV
To SCART
input
DCS-363.book 32 ページ ２００７年４月１８日 水曜日 午後３時３８分