Pioneer YRD5301BS, DEH-2200UB Installation, DIN front/rear mount, DIN Front-mount, DIN Rear-mount

Section

03Installation

Important

!Check all connections and systems before final installation.

!Do not use unauthorized parts as this may cause malfunctions.

!Consult your dealer if installation requires dril- ling of holes or other modifications to the vehi- cle.

!Do not install this unit where :

—it may interfere with operation of the vehi- cle.

—it may cause injury to a passenger as a re- sult of a sudden stop.

!The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.

!Optimum performance is obtained when the unit is installed at an angle of less than 60°.

2Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.

Dashboard

Mounting sleeve

3 Install the unit as illustrated.

Use commercially available parts when instal- ling.

Nut

60°

DIN front/rear mount

Screw

Firewall or metal support

Metal strap

This unit can be properly installed either from “Front” (conventional DIN front-mount) or “Rear” (DIN rear-mount installation, utilizing threaded screw holes on the sides of unit chassis). For details, refer to the following in- stallation methods.

DIN Front-mount

1Insert the mounting sleeve into the dashboard.

For installation in shallow spaces, use the sup- plied mounting sleeve. If there is enough space, use the mounting sleeve that came with the vehicle.

Screw (M4 8)

#Make sure that the unit is installed securely in place. An unstable installation may cause skip- ping or other malfunctions.

DIN Rear-mount

1Determine the appropriate position where the holes on the bracket and the side of the unit match.

16 En