Planar 020-1229-03A user manual Installing an UltraRes Display on a Wall

Installing an UltraRes Display on a Wall

7If you have screwed the template in place, remove each screw and the template.

8Line up the middle hole of the top wall mount with the screw hole drilled from the template.

Note: This picture shows mounts for a landscape installation.

9Tighten the screw into the mount.

10Use a level to make sure the mount is level.

11Then install additional screws as needed.

Note: Screws installed near the mount hooks provide the best support.

12Install the center screw in the bottom mount and repeat steps 10-11for any additional screws that you want to install. Note that there are open mount channels on the brackets. So you can install the screws wherever necessary along those channels.

Planar UltraRes User Manual 32