Planar 020-1229-03A user manual MI4

Supported UltraRes RS232 Commands

Setting	Command Code	Read/Write	Inc/Dec	Min Value	Max Value	String?	Password	Protected?		Notes
									0	= Based on Input Source
Multiple Input 4	MI4	R/W	No	0	2	No	No		1 = DisplayPort 4
									2	= HDMI 4
Multiple Input Preset	PSA	W	No	0	7	No	No		Value = preset number
Apply
Multiple Input Preset	PSS	W	No	0	7	No	No		Value = preset number
Save
Power	PWR	R/W	No	0	1	No	No		0	= Off
									1	= On
									0	= Off
Splash Enable	SPE	R/W	No	0	2	No	No		1 = Landscape
									2	= Portrait
									String format = “aabbccddeeff”,
									where:
									“aa” is the Input Source value, in hex.
									“bb” is the Input Mode value, in hex.
									“cc” is the Multiple Input 1 setting, in
Source Setup All	SSA	R/W	No	N/A	N/A	Yes	No		hex.
									“dd” is the Multiple Input 2 setting, in
									hex.
									“ee” is the Multiple Input 3 setting, in
									hex.
									“ff” is the Multiple Input 4 setting, in
									hex.
									0	= Standby
									1	= Powering Up
Status	STA	R	No	0	4	No	No		2 = On
									3	= Powering Down
									4	= Error
Standby Mode	STB	R/W	No	1	0	No	No		0	= Low Power
									1	= Fast Startup
System Reset	SYS	W	No	N/A	N/A	No	No		Action will be performed on any
									setting value

Planar UltraRes User Manual 109