Ethernet Cable Connection | Pirelli DRG A225G specs

DISCUS™ DRG A225G

To connect the Ethernet cable:

1.Connect one end of the Ethernet cable into one of the four Ethernet ports on the rear of the Router

2.Connect the other end of the Ethernet cable into the Ethernet Network card of your computer

3.Verify if the Ethernet Network card is configured as DHCP client, otherwise configure it to remain in the same local network of the router interface.

FIGURE 2. Ethernet Cable Connection

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

15

Image 13

Pirelli DRG A225G manual Ethernet Cable Connection

Contents

Page Discus DRG A225G Contents Status Safety Information Certifications Introduction Package Contents Description Sample Network LED Front Panel USB Rear Panel Port Description Port Description Positioning the router Hardware Installation Phone Cable Connection Connecting the router Ethernet Cable Connection MAC Windows Phones Connection Connecting the phones To go on with the Setup wizard, press the Next button Setup Wizard ISP Parameters WirelessFirewall Firewall Panel Confirm Channel and Ssid WirelessParameter Description WPA/WPA2 and WPA2 Only Wireless Security WPA/WPA2 parameters settings 802.1x Authentication parameters WEP WEP Discus DRG A225G Information Status Safety Information CE Mark Certifications Weee 10BASE-T Glossary100BASE-TX DSL Dhcp ISP IeeeLAN MAC Ssid TCP TCP/IPVCI VPI Wizard Wireless ClientWlan WPA Discus DRG A225G