Pitco Frialator SEH Multiple Level Computer Programming Instructions, First Level Programming

MULTIPLE LEVEL COMPUTER

PROGRAMMING INSTRUCTIONS

POWER ON/OFF KEY PROGRAM KEY TEMPERATURE KEY TIME KEY POWER ON/OFF KEY

PRODUCT KEYS

TO CHECK ACTUAL TEMP.	After 5 secs. machine will return to run mode.
TO CHECK SET TEMP.		After 5 secs. machine will return to run mode.
TO CHECK COOK, SHAKE, AND HOLD TIMES		THEN THE PRODUCT KEY DESIRED
NOTE: THE TIMES WILL BE DISPLAYED IN SEQUENCE PAUSING MOMEN-
TARILY ON EACH TIME AND THEN RETURN TO COOK MODE.
TO ENTER BOIL MODE	enter	(	if using ºC mode) when last digit of

temperature is entered, boil mode will start automatically. You must turn off both fryers to exit Boil mode.

CHECKING THE REMAINING TIME WHEN USING MULTIPLE TIMERS

TO VIEW REMAINING TIME ON ANY FUNCTION KEYS WHEN MULTIPLE TIMERS ARE COUNTING IS AS FOLLOWS:

PRESS THEN PRESS FUNCTION KEY OF ANY NON DISPLAYED ACTIVE TIMERS YOU WANT TO VIEW

FIRST LEVEL PROGRAMMING

USING AND ENTERING FIRST LEVEL PROGRAMMING AND PROGRAMMING FUNCTION KEYS

Press the key (display shows "PROGRAM"), then enter pass word if needed. If you are unable to remember the set pass word use (6684).

TO PROGRAM SINGLE OR DUAL TANK ENTER DESIRED TEMP.

COMPUTER SET TEMP LEFT SIDE

TO PROGRAM DUAL TANK

COMPUTER SET TEMP RIGHT SIDE

TO SAVE OR EXIT
TO SET	COOK TIME	AND A PRODUCT KEY THEN
		ENTER TIME
TO SET	SHAKE TIME	ENTER TIME
TO SET	HOLD TIME	ENTER TIME AND
TO SAVE OR EXIT

L20-246 Rev 0 (12/02) 5