INSTALLATION |
|
To Access Electrical Connections |
|
5/16 Wrench Required |
|
1) | 1” (2.54cm) Access Hole |
2) | Connection Points |
| 1/2” (1.27cm) Allen Wrench Required |
3) | Ground Connection |
| Flat head screwdriver required |
1.6. VENTILATION AND FIRE SAFETY SYSTEMS
Your new appliance must have proper ventilation to function safely and properly. It is very important to install a fire safety system. Your ventilation system should be designed to allow for easy cleaning. Frequent cleaning and proper maintenance of the ventilation system and the appliance will reduce the chances of fire. Ventilation and fire safety systems must comply to local and national codes. Refer to ANSI 83.11 for a list of reference documents that will provide guidance on ventilation and fire safety systems.
1.7. INSPECTION
Before you begin filling and operating the appliance, perform the following visual checks:
9After the appliance is in its permanent location, check the levelness.
9Ensure that the probe, heating element and high temperature limit is in place and secure.
Check the high limit bulb mounting screws to ensure that they are tight.
9Review the installation portion of this manual and ensure that all steps have been followed and executed properly.
1)Probe
2)High Temperature Limit (may be either style)
3)Heating Element
4
