Volume Control
None: through OS control only. Only available on LX1250TI, LX1251, does not have Audio.
Function Buttons on Front of display
The LX1250TI will have buttons and LEDs on the front of the display for user interaction. All buttons are silicon with positive feedback and backlight with white LEDs
Power interrupt button (All-in-one power button)
This button is not connected to the monitor power. The power interrupt button passes through to the rear IF connector. It shall be a SPST,N.O. momentary push button.
(+) Button
This button increases brightness of the backlight
(-) Button
This button decreases the brightness of the backlight
LED status light
The Monitor shall have a single LED for video status.
LED green
The LED Shall be green with there is video present
LED amber
The LED shall be amber when there is no video signal present and the monitor will go into standby mode.
Module Specifications
This section describes the internal components of this monitor. (Refer to Block Diagram in the Product Description Section 1.4)
AMLCD
Industrial grade with high bright LED backlight
Touchscreen
Infrared type: sensors and controller located in bezel
Touch surface
3mm solid glass, chemically strengthened, Anti glare coating AG level 110. The touchscreen will function even if the surface is scratched or broken.
Touchscreen interface
USB - HID
Touchscreen resolution
4096 X 4096
Touchscreen driver
Windows XP, Linux kernel ( Fedore Code 4 ) support
LX1250TI User Manual | 26 |
