Xerox 96MX manual Grid and Text command examples, Grid unit scaling specifications

D. GRID and TEXT command examples

This appendix shows the grid unit scaling specifications when the grid parameters are omitted or specified.

Table D-1.	Grid unit scaling specifications
Grid unit specification	System response
Omitted: default scaling	When the system receives the FORM id command, it
	sets grid scaling to that of FMT1; if it subsequently
	receives the PORTRAIT command, it sets the scale
	to that of FMT6.
Specified in GRID command	Replaces default scaling.
Specified in BOX or LINE	Replaces GRID command scaling for that command
command [IN unit]	only (becomes the default scaling).
Specified for a parameter	Overrides any scaling specified via GRID, BOX, r
	LINE commands for the parameter only.
	Examples:
	GRID 1 INCH;
	AT 2 CM LINE FROM 3 TO 1500 DOTS;
	COMMENT EQUIVALENT TO: AT 2 CM LINE
	FROM 3 INCHES TO 1500 DOTS;
	AT 2 LINE IN CM FROM 3 INCHES TO 1500 DOTS;
	COMMENT EQUIVALENT TO: AT 2 CM LINE FROM 3
	INCHES TO 1500 DOTS;

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE D-1