Xerox 96MX manual Drawing parallel vertical lines

FORMS DESCRIPTION LANGUAGE

Example 3 AT 2 DRAW 5 VERTICAL LINES FROM 5 TO 10 AND REPEAT EVERY 2;

This command specifies the drawing of five vertical lines. The first line begins two horizontal grid units to the right of the form origin and five grid units down from the form origin, and ends ten grid units down from the form origin. This line is repeated every two horizontal grid unit intervals, as shown in figure 3-10.

Figure 3-10.Drawing parallel vertical lines

Example 4 AT 4 DRAW 5 LINES FROM 2 TO 4 AND REPEAT HORIZONTALLY EVERY 4;

This command specifies five short lines to be drawn, each two grid units long, with each starting point spaced four grid units apart and separated two grid units from the end of the preceding line, as shown in figure 3-11.

Figure 3-11.Drawing repeated horizontal lines

3-22 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE