Xerox 96MX manual Next Horizontal Vertical BOX ‘text‘ ‘text‘, Adjacent boxes

FORMS DESCRIPTION LANGUAGE

BOTTOM LEFT TEXT ALIGNED LEFT FONT 1 IN BOTTOM LEFT BOX 20,10 ’PART NUMBER’;

PART NUMBER

BOTTOM CENTER TEXT ALIGNED CENTER FONT 3 IN BOTTOM CENTER BOX 40,10 ’PART NUMBER’;

PART NUMBER

BOTTOM RIGHT TEXT ALIGNED RIGHT FONT 1 IN BOTTOM RIGHT BOX 10,40 ’PART NUMBER’;

PART NUMBER

Adjacent boxes The BOX position is specified by the coordinates of the upper left corner of the box in which the text string is to be placed. If text is to be placed in an adjacent box (either vertically or horizontally adjacent), this can be specified by an IN NEXT BOX parameter, having the following form:

[[IN] [NEXT] HORIZONTAL VERTICAL BOX ‘text‘ [‘text‘ . . . ]] . .

. ] ;

To be considered adjacent, the boxes must have a common side. The keywords IN NEXT HORIZONTAL BOX specify the next horizontal box to the right of the current box. The keywords IN NEXT VERTICAL BOX specify the box beneath the current box. These adjacent boxes are shown in figure 3-17. The default is

HORIZONTAL.

Figure 3-17.Adjacent boxes

3-36 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE