![](/images/new-backgrounds/1124331/12433169x1.webp)
FORMS DESCRIPTION LANGUAGE
Setup commands
Before entering commands to describe a form, enter the setup commands to specify the following:
•
•
•
•
•
FORM command
PAPER command
LANDSCAPE/PORTRAIT command
GRID command
FONT command
Of the setup commands, only the FORM command is always required. The others are optional. (If they are not defined, the defaults are used.) The FONT command is also required if text is to be included on the form.
FORM command
The FORM command defines the name of the form. Once the form is compiled and stored on the system disk, this is the name used by the LPS software to reference the form.
The FORM command must be the first command in the form definition and must be completely contained in the first record of the form definition.
Naming the form The FORM id portion is mandatory. The format is as follows:
FORM id;
The “id” portion is a one- to
Example:
FORM 3BOXES;
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE |