Xerox 96MX manual Basic Concepts

BASIC CONCEPTS

If you are measuring the grid in cpi and lpi units, the origin of the “A” character cell is located two lines down and one character width to the right of the form origin. At 10 cpi and 6 lpi, the “A” is .33 inch down from the form origin and .10 inch to the right.

Negative coordinates Negative x and y values also may be used to place form elements above and or to the left of the form origin, as long as the values are within system page boundaries.

UNIT value The unit value of the GRID command specifies the unit of measurement FDL commands use to position form elements on the page. Optionally, you can select a predefined format that automatically provides grid unit values. Individual FDL commands may override GRID unit values.

XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE 2-9