STARTING AND SHUTTING DOWN THE PROJECTOR
1. Remove the lens cover.
2. Connect the power cord to the projector. Connect the other end to a wall outlet.
3.
4.
5.
6.
7.
Press the Power button. The Power LED on the projector turns on. Turn on the con- nected devices.
The language selection screen appears (Initial setup only). Select the desired lan- guage.
1.Press the cursor STbutton until Language is highlighted.
2.Press the cursor W X or Menu but- ton to confirm the language, and close the OSD.
If more than one input device is connect- ed, press the source bottom to search.
Press the Power button to turn off the projector. The Powering Down screen appears.
Note: Pressing the Power button again within five (5) seconds cancels powering down the projector.
When the Power LED stops flashing, the projector goes on standby mode.
Do not unplug the power cord until the Ready LED stops flashing, indicating the projector has cooled down.
8
