Bottom view, Security Lock, System, User’s Manual | Planar PR3020

Security Lock

User’s Manual

ITEM	LABEL		DESCRIPTION	SEE
				PAGE:

14.	Security Lock		Secure to permanent object with a Kensington® Lock	36
			system	36
			system

Note:

If your video equipment has both S-video and RCA jacks (composite video) connect to the S-video connector.

S-video provides a better quality signal.

Bottom view

ITEM	LABEL	DESCRIPTION	SEE PAGE:

1.	Ceiling support holes	Contact your dealer for information on mounting
		the projector on a ceiling.

2.	Height adjuster button	Push to release height adjuster

3.	Height adjuster	Adjuster drops down when adjuster button is	16
		pushed	16
		pushed

4.	Tilt adjuster	Adjust angle of the picture

– 6 –

Image 14

Planar PR3020, PR5020 Bottom view, Security Lock, Secure to permanent object with a Kensington Lock, system, User’s Manual

Contents

Page Corporate Headquarters 1195 NW Compton Drive Beaverton, OR Planar Systems, IncPlanar Customer Support Telephone US 1-866-PLANAR1 866 Outside US 503 Disclaimer User’s ManualCopyright Trademark Recognition Remote Control Important Safety InformationSymbols Used General Safety Information Symbol Explanations Power SafetyCleaning the Projector Replacing the Lamp About this manual Main FeaturesCables, Replacement Lamps and Accessories Register Your Planar Products Today ON-SCREEN DISPLAY OSD MENU SETTINGS Table of contentsSETUP AND OPERATION MAINTENANCE AND SECURITY TIMING MODE TABLE SAFETY CERTIFICATIONSPR5020 Projection distance and size table REGULATORY COMPLIANCE Avoid using the projector in dusty environments Packing ChecklistGETTING STARTED Front-right View Views of Projector Parts Top view-On-screen Display OSD buttons and LEDs Height-adjuster buttonPush to release height adjuster DLP Projector - User’s Manual User’s Manual Rear view Secure to permanent object with a Kensington Lock Bottom viewSecurity Lock system Remote Control Parts Page down when connected through USB to a PC Page Down Remote Control Operating Range Projector and Remote Control Buttons SETUP AND OPERATION Inserting the Remote Control Batteries Connecting Input Devices User’s Manual Starting and Shutting down the Projector Turn off the main Power switch when the Ready LED stops flashing Setting an Access Password Security Lock Adjusting the Projector Level Use the Keystone button to correct image distor- tion Adjusting the Zoom, Focus and KeystoneAdjusting the Volume OSD Menu Controls ON-SCREEN DISPLAY OSD MENU SETTINGSNavigating the OSD Setting the OSD Language Setting the OSD Language Gamma Main MenuInput Main Menu Functions Available for Connected Source x = available to video source Setup Menu Functions Available for Connected Source Setup Menu Advance Feature Data source DLP Projector - User’s Manual User Color Config Menu The Config menu functions are available to all video sources Utility Menu Utility Menu Functions Available for Connected Source Tool Menu Status Menu These MAINTENANCE AND SECURITY Replacing the Projection Lamp 4. Lift the module handle up D 2. Open the lamp com- partment cover B3. Remove the two screws from the lamp module C Reverse steps 1 to 5 to install the new lamp module Pull firmly on the mod- ule handle to remove the lamp module D Resetting the Lamp Cleaning the Projector Using the Kensington Lock Cleaning the LensCleaning the Case Tips for Troubleshooting TROUBLESHOOTINGCommon problems and solutions Problem No image appears on the screen LED Error MessagesImage Problems Problem The image is blurred Audio Problems Lamp ProblemsRemote Control Problems Problem The image is flat with no contrast PR3010 SPECIFICATIONSInput/output connectors PR3020 L Projection Distance PR3020 and PR3010 Projection distance and size tableProjection Distance V.S. Projection Size PR5020 Projection distance and size table Shaded rows are equivalent measurement in feet and inches Resolution Timing Mode TableSignal Video Projector Dimensions 300 mm11.8 mm396 244 mm9.6 FCC Warning Safety CertificationsREGULATORY COMPLIANCE Canada Planar Systems, Inc Planar Customer Support