User Color, User’s Manual | Planar PR3020, PR5020 guide

User Color

User’s Manual

User Color

Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Press to move to the User Color menu and then press Enter or . Press to move up and down to select a color. Press to change values for settings, and then press Enter or to confirm the new setting.

ITEM		DESCRIPTION	DEFAULT

Red	Press the cursor	button to adjust the red color level. (Range: 0-100)	80
Green	Press the cursor	button to adjust the green color level. (Range: 0-100)	80
Blue	Press the cursor	button to adjust the blue color level. (Range: 0-100)	80
Cyan	Press the cursor	button to adjust the cyan color level. (Range: 0-100)	80
Magenta	Press the cursor	button to adjust the magenta color level. (Range:0-100)	80
Yellow	Press the cursor	button to adjust the yellow color level. (Range: 0-100)	80
White	Press the cursor	button to adjust the white color level. (Range: 0-100)	80
Reset	Resets all User Color settings to default values		—

– 26 –

Image 34

Planar PR3020, PR5020 manual User Color, User’s Manual

Contents

Page Corporate Headquarters 1195 NW Compton Drive Beaverton, OR Planar Systems, IncPlanar Customer Support Telephone US 1-866-PLANAR1 866 Outside US 503 Disclaimer User’s ManualCopyright Trademark Recognition Remote Control Important Safety InformationSymbols Used General Safety Information Symbol Explanations Power SafetyCleaning the Projector Replacing the Lamp About this manual Main FeaturesCables, Replacement Lamps and Accessories Register Your Planar Products Today ON-SCREEN DISPLAY OSD MENU SETTINGS Table of contentsSETUP AND OPERATION MAINTENANCE AND SECURITY TIMING MODE TABLE SAFETY CERTIFICATIONSPR5020 Projection distance and size table REGULATORY COMPLIANCE GETTING STARTED Packing ChecklistAvoid using the projector in dusty environments Front-right View Views of Projector Parts Top view-On-screen Display OSD buttons and LEDs Height-adjuster buttonPush to release height adjuster DLP Projector - User’s Manual User’s Manual Rear view Secure to permanent object with a Kensington Lock Bottom viewSecurity Lock system Remote Control Parts Page down when connected through USB to a PC Page Down Remote Control Operating Range Projector and Remote Control Buttons SETUP AND OPERATION Inserting the Remote Control Batteries Connecting Input Devices User’s Manual Starting and Shutting down the Projector Turn off the main Power switch when the Ready LED stops flashing Setting an Access Password Security Lock Adjusting the Projector Level Adjusting the Volume Adjusting the Zoom, Focus and KeystoneUse the Keystone button to correct image distor- tion Navigating the OSD ON-SCREEN DISPLAY OSD MENU SETTINGSOSD Menu Controls Setting the OSD Language Setting the OSD Language Input Main MenuGamma Main Menu Functions Available for Connected Source x = available to video source Setup Menu Functions Available for Connected Source Setup Menu Advance Feature Data source DLP Projector - User’s Manual User Color Config Menu The Config menu functions are available to all video sources Utility Menu Utility Menu Functions Available for Connected Source Tool Menu Status Menu These MAINTENANCE AND SECURITY Replacing the Projection Lamp 3. Remove the two screws from the lamp module C 2. Open the lamp com- partment cover B4. Lift the module handle up D Reverse steps 1 to 5 to install the new lamp module Pull firmly on the mod- ule handle to remove the lamp module D Resetting the Lamp Cleaning the Projector Cleaning the Case Cleaning the LensUsing the Kensington Lock Common problems and solutions TROUBLESHOOTINGTips for Troubleshooting Problem No image appears on the screen LED Error MessagesImage Problems Problem The image is blurred Audio Problems Lamp ProblemsRemote Control Problems Problem The image is flat with no contrast PR3010 SPECIFICATIONSInput/output connectors PR3020 Projection Distance V.S. Projection Size PR3020 and PR3010 Projection distance and size tableL Projection Distance PR5020 Projection distance and size table Shaded rows are equivalent measurement in feet and inches Resolution Timing Mode TableSignal Video Projector Dimensions 300 mm11.8 mm396 244 mm9.6 FCC Warning Safety CertificationsREGULATORY COMPLIANCE Canada Planar Systems, Inc Planar Customer Support