Resetting the Lamp

DLP® Projector – User’s Manual

Resetting the Lamp

After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:

1.

2.

3.

4.

Press the Menu button to open the Main menu.

Press the cursor Cleaning the ProjectorManual background button to move to the Status menu.

Press the cursor Manual backgroundManual background button to move down to Lamp Hour Reset.

Press the cursor Manual background or Enter button.

A message screen appears.

5. Press the cursor buttons in this order:

Manual background; Manual background; Manual background; Manual background.

The Status menu appears again showing the Lamp Hours reset to zero.

Cleaning the Projector

Cleaning the projector to remove dust and grime will help ensure trouble-free operation.

Warning:

1.Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could result in a severe burn.

2.Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on the projector.

3.If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated room for several hours before using.

4.If a lot of water gets into the projector interior when cleaning, have the projector serviced.

35

Page 43
Image 43
Planar PR5020, PR3020 manual Resetting the Lamp, Cleaning the Projector, DLP Projector - User’s Manual