Planar PS466OT, PS4660T and PS5560T user manual Default, Options

Advanced Menu

Baud Rate

Smart Light Control

Wake Up From Sleep

Factory Reset

Options: 115200, 38400, 19200, 9600

Default: 19200

Options: Off, DCR, Light Sensor

Default: Off

Allows you to configure the display to “wake up” when it receives a digital signal through the DisplayPort, HDMI or DVI connectors. With VGA Only, the display can only “wake up” by sending an analog video signal through the VGA connector.

Options:

Never Sleep - The display will never enter a power saving mode.

VGA Only - The display will enter a power saving mode if it cannot sync for five minutes with the DisplayPort, HDMI or DVI. If the sync is present, the display will “wake up” again.

VGA, Digital, RS-232 - The display will enter a power saving mode if it cannot sync for five minutes with any source.

Default: VGA Only

Restores all settings to their defaults.

Options: No, Yes

Default: No

PS4660T and PS5560T User Guide 41